Pressure

Pressure Gauge

Pressure Gauge Analog Pressure Gauge Digital Pressure Gauge Test Pressure Gauge Oil Filled Pressure Gauge Differential Pressure Gauge Absolute Pressure Gauge Oxygen Pressure Gauge When the pressure gauge is exposed to air (atmosphere pressure) shows the zero. We must know exact amount of atmospheric pressure in the measurement area at the same time Atmospheric pressure […]

Read More

Pressure Switch

Pressure switches  Pump Pressure Switch  Water pressure switch  Hydraulic pressure switch  Vapor Pressure Switches  Air pressure switch  Pneumatic pressure switch  Explosion Proof Pressure Switch Pressure switch or Pressure controller use for adjust the reservoirs pressure and prevent pressure raising in industry frequently. In the case of digital and electronic Borden or diaphragm instead of strain […]

Read More

Pressure Transmitter

Pressure Transmitter Pressure Transmitter is one of the accurate and widely used instrument in measuring pressure which measure the pressure of liquids and gases and other liquids. The transmitters are in fact converters and they can converts a quantity into another quantity. In this device a signal produced according the environment pressure and convert to […]

Read More

Temperature

Temperature Indicator

Temperature Indicator A temperature indicator is a very easy to use and cost-effective control device that helps to determine and display, e. g., the duration of exposure to excessive temperatures. A temperature indicator can be used in fridges, dryers, furnaces and other technical equipment and many models are also suitable for the measurement and indication […]

Read More

Temperature Switch

Temperature Switches are the mechanisms used to measure temperature. The working of a temperature switch is based upon the temperature variations taking place in an enclosed space, or in an open area adjoining the temperature detecting component. In general, the functioning of a temperature switch and a pressure switch is almost same since both the […]

Read More

Temperature Transmitters

Temperature Transmitter Temperature transmitters in terms of installation can be divided into two categories: A temperature transmitter head (head mounted): Transmitter head temperature sensor placed inside the chamber of the head mounted type are known. Temperature Transmitter Rail (rail mounted): placed inside the panel are mounted on rails that are known to rail mounted Temperature […]

Read More

Flow

Variable Area Flow meter

Variable Area (VA) meter Tube material: glass Acrylic- Plax Glass- * Glass with steel shell and anti-static paint * Connections: ABS Steel * Gender Clue: PVC, stainless steel. * Size fitting: “2/1” 4/3 “1” 2/1 1 “2   Rotameter as flow represents a moment or variable level or variable area flow indicator in flow measurement […]

Read More

Flow Indicator

Flow Indicator FLOW means that the volume of material passing through the measurement of time  Specifications: Available in body, cover, gasket according to the Customer orders Threaded connection or flange Maximum operating temperature range up to 250 ° C Maximum pressure up to 100 bar In most industries, including oil and Petrochemical and… , Knowing […]

Read More

Ultrasonic Flow Meter

Ultrasonic flow meter Independent of fluid conductivity and pressure Pipe diameter range: 100mm to 6,500 mm Flow velocity :0.01 m/s to 25 m/s Accuracy: 1% of measured valve. Display with current (4-20ma), voltage, pulse and relay. An ultrasonic flow meter is a type of flow meter that measures the velocity of a fluid with ultrasound […]

Read More

Mass Flow meter

Mass Flow Meter Mass flow meters,Thermal and Coriolis Suitable for gas and liquids Installation and inline models High accuracy and response times Various ranges explosion- proof or Non-hazardous area The advantages of this type of flow meter is Quick and easy measurements. And it is suitable for all the suffering It is widely used in […]

Read More

Vortex Flow meter

Vortex Flow meter   Suitable for gas, vapor-liquid All stainless steel structure Size 4/3 to 12 inches Local or remote indicator Very wide flow range High accuracy Vortex flowmeter for volumetric flow measurement in that course for size some cases, such as for mass Vapor Pressure Transmitter need to use separate As well as temperature […]

Read More

Flow Switch

Flow Switch Inline variable level for liquids Flow Switches variable level ,that includes a wide range of standard flow for liquids are suitable for detection operations. Flow Switch paddles for liquids For liquids such as water, ethylene glycol or any non-corrosive fluid is used. It is usually in chillers, pumps, boilers and other industrial equipment […]

Read More

Level

Sight Glass

Sight Glass Top, bottom, side and back connected A wide range of different materials (brass, S.S, carbon steel) Different lengths of visible glass Non-frost, illuminator, Mica shield, cocks on request

Read More

Magnetic Level Indicator

Magnetic Level Indicator Magnetic float level sensors involve the use of a permanent magnet sealed inside a float whose rise and fall causes the opening or closing of a mechanical switch, either through direct contact or in proximity of a reed switch. With mechanically actuated floats, the float is directly connected to a micro switch. […]

Read More

Capacitance Level Transmitter

Capacitance Level Transmitter Rod probes up to 3 m Cable probes up to 20 m Fully or partly insulated probes Power supply: 12-24 VDC , output:4-20 mA Different operating pressure/ temperature process connection, material Applicable with viscous or corrosion materials, chemicals with dense gas layers above the surface, liquids, powders, granules  

Read More

Ultrasonic Level Transmitter

Ultrasonic level Transmitter Ultrasonic waves are used to measure level of liquids and solid objects in industries. Ultrasonic level measurement is contact less principle and most suitable for level measurements of hot, corrosive and boiling liquids, It’s easy to use and monitor level and signal on local indicator or wall mount indocatro in control room […]

Read More

Level Switch

FLOAT LEVEL SWITCH The oldest methods used to measure liquid level of immersion material properties of liquid level and display the changes to help is connected to a show. This mechanical method in addition to ease of use in many specific conditions such as high temperature and pressure in the tanks can be used. Level […]

Read More

Float Level Switch

Float Level Switch For liquids with low or high specific gravity No maintenance is required Assure a good resistance at the main part of the chemical agents Different lengths & depths of immersion Different body, socket joint and cable materials  

Read More

Level Transmitter

Level Transmitter For measuring of hydrostatic pressure (level) in tanks Enhanced resistance to environmental temperature variations Durability Long term signal stability Resistance to vibration and hydroblow High precision of conversion A wide range of pressure Ultrasonic level measurement with Prosonic sensors provides continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to […]

Read More

Instrument Fitting

Pipe Fitting

Pipe Fitting Features Thread fittings are designed to the requirements of ASME B31.3 process piping code. Pipe thread sizes are available from 1/8” to 1”. Thread construction is based on the requirement of ASME B1.20.1to ensure maximum thread engagement. Burr-free internal and clean appearance Male threads capped for protection Knee Instrumentation, Tee instrumentation, instrumentation cap, […]

Read More

Ball Valve

Ball Valve Features 316 SS mini ball valve overcomes limitation of installment space PEEK seat for high pressure & performance Low operating torque and smooth 1/4 turn action Ends with VEE-LOK tube and threaded connection Specifications Maximum Operating Pressure 6000 psi at 70°F (21°C) Operating Temperature -22°F (-30°C) to 392°F (200°C) Connection 1/8”~1/4”Female x Female/ […]

Read More

Distribution Valve

Distribution Valve Features Optimize setting of the main pipe and branch. Quantity of outlet connections are available from 4 to 12 Specifications Maximum Working Pressure 6000 psi (414bar) at 100°F (38°C) Working Temperature -65°F (-54°C) to 464°F (240°C) Air Distribution Manifold (Instrument Air) Instrument air distribution manifold is a pipe shaped chamber (manifold) with several […]

Read More

Mini Valve

Mini Valve Features Compact installation T bar handle on hard seat Knurled round handle on POM seat Specifications Maximum Working Pressure 3000 psi (210bar) at 100°F (38°C) Working Temperature -22°F (-30°C) to 392°F (200°C) Connections NPT, BSPT, BSPP 1/8”, 1/4” Knee Instrumentation, Tee instrumentation, instrumentation cap, coupling devices, transforming the instrument, nipple instrument, Crossroads instrument, […]

Read More

Multiport Gauge Valve

Gauge Valve Features An economical method to install pressure switches, gauge and differential transmitters Lagging extension body is inserted through pipe for insulation. Optional with POM soft seat Plugs and bleed valves offered on request Specifications Maximum Working Pressure: 6000 psi (414bar) at 100°F (38°C) Working Temperature: Metal seat:-65°F (-54°C) to 464°F (240°C) POM seat:-20°F […]

Read More

Needle Valve

Hexagonal Bar Stock Needle Valve Features Adjustable to extend service lives Optional with graphite seals for high temperature Choice of bleeding function Optional with 10000 psi on metal to metal Available with straight through pattern in POM seat for easy cleaning Specifications Maximum Working Pressure 6000 psi (414bar) at 100°F (38°C) Working Temperature -65°F (-54°C) […]

Read More

Relief Valve

Proportional Relief Valve Features 316 stainless steel standard with Viton O-ring Optional with tube ends Set pressure range: 50 to 6000 psi (3.4 to 414 bar) Color coded springs to classify a wide range of set pressure Specifications Maximum Working Pressure 6000 psi (414bar) at 100°F (38°C) Working Temperature -22°F (-30°C) to 392°F (200°C) Connections […]

Read More

Needle Valve

   Needle Valve Features Compact design to provide economical solution Optional with panel mountable Choice of bleeding function Specifications Maximum Working Pressure 6000 psi (414bar) at 100°F (38°C) Working Temperature -22°F (-30°C) to 392°F (200°C) Connections NPT, BSPT, BSPP 1/8”, 1/4”, 3/8”, 1/2” Knee Instrumentation, Tee instrumentation, instrumentation cap, coupling devices, transforming the instrument, nipple […]

Read More

Threaded 2.3.5 Valve Manifold

 2.3.5 Valve Manifold Features Colored caps for valve function identification Application to differential pressure, level and transmitters Optional port sizes and thread forms available Specifications Maximum Working Pressure 6000 psi (414bar) at 100°F (38°C) Working Temperature -65°F (-54°C) to 464°F (240°C)   339/5000 Knee Instrumentation, Tee instrumentation, instrumentation cap, coupling devices, transforming the instrument, nipple […]

Read More

Regulator

Pressure Regulator

pressure regulator A pressure regulator is a control valve that reduces the input pressure of a fluid to a desired value at its output. Regulators are used for gases and liquids, and can be an integral device with an output pressure setting, a restricting and a sensor all in the one body, or consist of a separate pressure sensor, […]

Read More

Filter Regulator

Filter regulators Filter regulators in different sizes and different models, including the following. Regulator and Filter Size: 3 “, 2”, 1 “, 3/4”, 1/2 “, 3/8”, 1/4 “, 1/8” is Drain the moisture (water) in the model manual drain, drain semi-automatic and fully automatic unloading is. Air Filter regulators structure: Air filter regulators consists of […]

Read More

Control Valve

Other Product

Thermowell

Thermowell  Thermowells are typically constructed of solid drilled-out bar stock and are designed to protect a temperature sensor from flow, high pressure and harsh environments. Thermowells encase and protect temperature sensors from the harmful effects of the processes into which they are immersed without substantially insulating the temperature sensor (thermocouple, RTD, etc.) from the temperature […]

Read More

Orifice Plate

Orifice Plate The orifice plate flow meter is commonly used in clean liquid, gas, and steam service. It is available for all pipe sizes, and if the pressure drop it requires is free, it is very cost-effective for measuring flows in larger pipes (over 6″ diameter). The orifice plate is also approved by many standards […]

Read More